The following suppliers offer Extech products. Use the overview to compare suitable suppliers, product categories and laboratory products and send a direct request.
No suppliers found.
Send your request to selected suppliers at the same time. They will contact you without obligation with suitable proposals.
These suppliers may also be relevant, but are currently not explicitly enabled for this request function.
Product categories linked on LabFinder with further independent product knowledge.
Anemometers measure wind speed and air or gas flow for environmental analysis, process control, and R&D. Select by measurement principle, range, accuracy, connectivity, and indoor or outdoor robustness. Mechanical, thermal, and ultrasonic designs differ in response time and suitability; turbulence or dust can reduce accuracy.
View product category →CO2 analyzers quantitatively monitor carbon dioxide in air for indoor spaces, laboratories, and technical systems, supporting ventilation assessment and high-concentration risk reduction. Selection may consider measurement range, accuracy, display, portability, connectivity, and alarms. Infrared NDIR sensors are typical; regular calibration is essential.
View product category →Air pressure data loggers continuously record atmospheric pressure for stationary or mobile monitoring, supporting trend analysis, validation, and process optimization. Select by accuracy, resolution, sampling rate, storage, data-transfer interface, and protection rating; temperature sensing can enable compensated pressure recordings.
View product category →Humidity data loggers automatically record air or material humidity at defined intervals, supporting documentation of trends in sensitive processes, storage monitoring, environmental measurements, and quality checks. Selection can consider accuracy, measurement range, storage capacity, transmission options, and required temperature range or protection class. Some variants also measure temperature.
View product category →Hygrometers measure relative humidity for laboratory, technical, environmental, and building applications such as drying, preservation, climate control, and indoor climate monitoring. Select according to accuracy, measuring range, environment, response time, and sensor principle; regular calibration and protection from dust or condensation help maintain reliable measurements.
View product category →Manometers detect and display liquid or gas pressure in laboratory setups, systems, and process pipelines, typically relative to atmospheric pressure. Select the measurement range, medium-compatible materials, accuracy, connection standard, and analog or digital display for the task; rapidly changing or pulsating pressures require special versions.
View product category →Multimeters measure DC and AC voltage, current, and resistance for troubleshooting, maintenance, development, and quality assurance on components, circuits, and systems. Choose based on accuracy, functions and ranges, display type, safety, and calibration capability; digital models often provide automatic ranging, while analog needle displays aid dynamic measurements.
View product category →Air particle counters quantify and size suspended airborne particles for cleanroom monitoring, process control, quality assurance, and indoor or ambient air assessment. Select by required particle-size range, accuracy, and airflow rate. Optical light-scattering or pulse-analysis models range from handheld units to fixed monitoring probes.
View product category →Pressure measuring devices determine liquid or gas pressure for process monitoring, analytics, and technical system quality assurance. They can measure overpressure, vacuum, or differential pressure using mechanical manometers or electronic sensors. Select by pressure range, medium compatibility, accuracy, output format, and environmental conditions.
View product category →Tachometers measure and display the rotational speed or velocity of moving parts such as centrifuges, pumps, shafts and motors, supporting process monitoring and workflow optimization. Select non-contact models for sensitive or hard-to-access surfaces, or contact versions for smooth, accessible surfaces.
View product category →Coating testers measure layer and dry-film thickness on coated surfaces for quality assurance in production and laboratories. Choose the measurement principle according to substrate material—magnetic for ferromagnetic substrates, eddy current for non-magnetic metals, or ultrasonic for non-metallic substrates. Regular calibration supports accurate, comparable results.
View product category →Light meters quantify light intensity and illuminance in lux, supporting standardized, comparable measurements for system optimization and technical research. Choose by measurement range, accuracy and sensor type; photoelectric sensors convert light into electrical signals. Regular calibration is essential, while spectral properties and colour temperature require additional instruments.
View product category →Temperature measuring instruments precisely record temperatures in liquids, solids, air, and on surfaces for controlled laboratory, quality assurance, and environmental analytical processes. Choose contact thermocouple or RTD devices for direct sensing, or infrared instruments for surface-only non-contact measurements; consider accuracy, range, interval, and calibratability.
View product category →All 13 product categories
Do you offer products from Extech? Present your company on LabFinder and gain visibility for this brand, suitable product categories and enquiries.
